Miller Saf-T-Climb Ladder System – Honeywell

The Saf-T-Climb System has more than 60 years of safe climbing history and is frequently the specified rigid rail ladder safety device for industry and government. This system provides total ladder climbing safety for workers on any site – above or below ground; straight or curved. Installation of a Saf-T-Climb fall prevention system means instant compliance with OSHA climbing safety regulations. Any slip or fall is stopped by the locking action of the Saf-T-Grip Shuttle.

• Slip or fall is instantly stopped as the Saf-T-Grip Shuttle locks onto  rail as soon as there is a slip or fall
• Harness & Shuttle (sleeve) sold separate
• Please fill out this form for a quotation  – Saf-T-Climb Worksheet Form

Total ladder climbing safety for workers on any site – above or below ground, straight or curved.

The round rail of the Saf-T-Climb makes dismounting safe and easy with a removable extension for up climbs through a hatch, down climbs through a hatch and permanent dismounts.

Saf-T-Notch Rail
This round, notched rigid rail runs up the middle of the ladder, held in place by a Rung Clamp positioned every six feet at minimum. For aluminum systems, rung clamps should be positioned every four feet at minimum.

Rung Clamps
Rung Clamps hold the Saf-T-Notch Rail in place. There are clamps for round rung ladders with rung diameters up to 1-1/4” and clamps for square rung ladders with rungs up to 1-1/4” thick.

Removable Ascending Hatch Dismount and Holder
This dismount is removable to allow a hatch door to close. The dismount is stored in a holder at the top of the ladder.

Removable Descending Hatch Dismount
This dismount is removable and installed when a worker needs to climb down.

Saf-T-Grip Shuttle
Any slip or fall is instantly stopped as the Saf-T-Grip Shuttle immediately locks onto the Saf-T-Notch rail as soon as there is a slip or fall. An integrated shock-absorbing element reduces force on the worker and system in the event of a fall.

Miller Saf-T-Climb Harness
The Miller Saf-T-Climb Harness was specifically designed for simplicity and comfort for use with the Saf-T-Climb ladder system. Harness features include:
• Bayonet buckles allow easy single action for a secure connection.
• The integral back/shoulder pad eliminates tangling of the harness straps, wicks away moisture, and provides all-day comfort.
• Lumbar padding, single back D-ring, single front D-ring, two side D-rings and two shoulder D-rings are all included.