Skip to product information
Miller Saf-T-Climb Ladder System - Honeywell
Please fill out this form for a quotation - Saf-T-Climb Worksheet Form
Total ladder climbing safety for workers on any site – above or below ground, straight or curved.
The round rail of the Saf-T-Climb makes dismounting safe and easy with a removable extension for up climbs through a hatch, down climbs through a hatch and permanent dismounts.
Saf-T-Notch Rail
This round, notched rigid rail runs up the middle of the ladder, held in place by a Rung Clamp positioned every six feet at minimum. For aluminum systems, rung clamps should be positioned every four feet at minimum.
Rung Clamps
Rung Clamps hold the Saf-T-Notch Rail in place. There are clamps for round rung ladders with rung diameters up to 1-1/4” and clamps for square rung ladders with rungs up to 1-1/4” thick.
Removable Ascending Hatch Dismount and Holder
This dismount is removable to allow a hatch door to close. The dismount is stored in a holder at the top of the ladder.
Removable Descending Hatch Dismount
This dismount is removable and installed when a worker needs to climb down.
Saf-T-Grip Shuttle
Any slip or fall is instantly stopped as the Saf-T-Grip Shuttle immediately locks onto the Saf-T-Notch rail as soon as there is a slip or fall. An integrated shock-absorbing element reduces force on the worker and system in the event of a fall.
Miller Saf-T-Climb Harness
The Miller Saf-T-Climb Harness was specifically designed for simplicity and comfort for use with the Saf-T-Climb ladder system. Harness features include:
• Bayonet buckles allow easy single action for a secure connection.
• The integral back/shoulder pad eliminates tangling of the harness straps, wicks away moisture, and provides all-day comfort.
• Lumbar padding, single back D-ring, single front D-ring, two side D-rings and two shoulder D-rings are all included.
Description
Please fill out this form for a quotation - Saf-T-Climb Worksheet Form
Total ladder climbing safety for workers on any site – above or below ground, straight or curved.
The round rail of the Saf-T-Climb makes dismounting safe and easy with a removable extension for up climbs through a hatch, down climbs through a hatch and permanent dismounts.
Saf-T-Notch Rail
This round, notched rigid rail runs up the middle of the ladder, held in place by a Rung Clamp positioned every six feet at minimum. For aluminum systems, rung clamps should be positioned every four feet at minimum.
Rung Clamps
Rung Clamps hold the Saf-T-Notch Rail in place. There are clamps for round rung ladders with rung diameters up to 1-1/4” and clamps for square rung ladders with rungs up to 1-1/4” thick.
Removable Ascending Hatch Dismount and Holder
This dismount is removable to allow a hatch door to close. The dismount is stored in a holder at the top of the ladder.
Removable Descending Hatch Dismount
This dismount is removable and installed when a worker needs to climb down.
Saf-T-Grip Shuttle
Any slip or fall is instantly stopped as the Saf-T-Grip Shuttle immediately locks onto the Saf-T-Notch rail as soon as there is a slip or fall. An integrated shock-absorbing element reduces force on the worker and system in the event of a fall.
Miller Saf-T-Climb Harness
The Miller Saf-T-Climb Harness was specifically designed for simplicity and comfort for use with the Saf-T-Climb ladder system. Harness features include:
• Bayonet buckles allow easy single action for a secure connection.
• The integral back/shoulder pad eliminates tangling of the harness straps, wicks away moisture, and provides all-day comfort.
• Lumbar padding, single back D-ring, single front D-ring, two side D-rings and two shoulder D-rings are all included.