Safety Boot Guardrail System - Reusable guardrail system - Eliminates bracing - Create instant toeboards - Temporary rail construction - Exceeds OSHA guardrail regs - Made in the USA - Safety Maker SB001

Unlimited Guardrail Potential

The SafetyBoot is not worn on your feet, it is THE reusable guardrail solution designed to maximize versatility, minimize waste and keep people safe! The safety boot is made from a high-impact polymer and weights just 2 lbs, but insert two 2X4’s into the base and you’ve got a rigid post. Slide some horizontal boards into the base and create instant toe-boards. The base itself is easy to install, with just a few bolts and washers the boot can be anchored into concrete, steel, wood.

Proactive & Proven

Guardrails cannot protect employees tomorrow, we must act today! Keep a supply ready for your crew for immediate protection against open edges and potential falls. Use the SafetyBoot to protect a job-site BEFORE your people leave for the day – no loose ends. Once a job is finished, break down your guardrails and prepare for the next build site. Use your SafetyBoot for years to come, minimize the cost of waste and fees from renting re-renting the same equipment.

Universal installation

The SafetyBoot can installed into wooden frames, plywood, steel and concrete using proper fasteners (NOT INCLUDED) and included fender washers. Installation is simple and can be broken down to 4 distinct steps.

1. Assemble – Cut 2X4 lumber into 42″ inch lengths, place into base (one at a time) and fasten with lag screw.
2. Position – Place the boots in a line along unprotected areas – no more than 8ft. apart.
3. Secure – Fasten safety boots to flooring using included fender washers and proper fasteners (Not included)
4. Build – Fasten top and mid rails to post, then insert toe-board.

Includes FOUR fender washers for each boot. Fasteners are not included.  See instructions here for fasteners specs.