EZ Mover – Used for moving SR2K counterweight bases – Powder coat yellow – Square steel tubing – BluewaterMFG 500023 500019
$539.00 – $570.00
Submit a request for bulk discount rates. Use this for large quantity orders that exceed the page quantity price breaks. Quotes are typically processed within 1 business day.Free Bulk Quote
You may also like…
100076 Securing Pin – For the safety rail 2000 – BlueWater MFG$13.00
EPDM Roof Pad for SR2K Countweight Base – Prevents damage to rooftops – For long term exposure to rubber membrane roof – BlueWaterMFG 100034$43.00
SR2000 Counterweight base – 108 lb. Cast Iron base – Four ports to support rail section at infinite angles – BlueWater 300014 300037$411.00 – $476.00
SR2000 LP Outrigger – Used to support rail runs on partial systems – Used to bypass obstructions and connect bases – BlueWater 500122 – Includes one base and connecting bar$442.00
SR2K Finishing rail with 24″ bull nose – Eliminates tripping hazards at ladder landings – Used to secure access points – Offset rail base for safer transitions – Non-penetrating design – BlueWater SR2000$711.00 – $830.00
Safety Rail 2000 (SR2K) rooftop guardrail system – Non-penetrating fall protection safety rail – Portable or permanent installation – OSHA compliant – BlueWater SR2000$512.06 – $670.66
EZ-Mover for the Safety Rail 2000
The EZ Mover is designed to make the back breaking task of moving the heavy SR2K Counterweight Base. much, much easier.
Its a simple, lightweight square tubing with a yellow anti-corrosion powder coating. While the EZ Mover is optional, it makes setting up and breaking down your Safety Rail 2000 much easier.
Safety Rail 2000 - Fall protection system
The safety rail 2000 is an easy to use, portable guardrail system designed to be setup and broken down per job site. The unique design eliminates both the cost and danger over intermediate counterweight commonly used in other (lesser) guardrail systems. SR2000 is simply a set of rails and bases, setup around an elevated work area to prevent injury.
Each kit includes: 1 rail section, 1 base and locking pins.
Installation is as easy as: 1-2-3.Best part of the Safety Rail 2000 is the ease in which the system can be setup and broken down per job requirements.
- Position the bases around the workarea
- Insert rails into base ports
- Insert the securing pins and lock base into place
Three workers can setup a 600ft of safety rail in under an hour.
Sold in many rail widths
Unique rooftops and elevated platforms require the use of many different combinations of rail widths. Rails sections are constructed of 1-5/8" steel tubing. Each base includes 4 ports, allowing the rail to be placed in an infinite number of positions. Each base can support up to 4 rails, gate assemblies and optional toe-board brackets available.
All rails meet the OSHA 42" height requirement for top and 21.5" for mid rails.
SR2000 railing requires a base
The safety rail 2000 system requires that each railing be counter-weighted by a base to prevent potential falls from elevated platforms. The non-penetrating design uses a 108 lb. cast-iron base to support the railing and any person who may fall into it. This unique design minimizes tripping hazards by eliminating the need of a intermediate counterweight. All bases feature four ports, allowing the rail to be positioned in any number of ways. Each base can support up to 4 rails.
Build your own Rooftop Guardrail system
The beautiful thing about the Safety Rail 2000 is the versitility and modular design of the railing and base.
|Safety Rail 2000||Each kit includes a rail section, base and locking pins.||SR2K|
|SR2000 Counterweight Base||108 lb. cast-iron base capable of support 4 gates||300014|
|EZ Mover||Makes it easier to move the heavy counterweight bases.||500023 500019|
|LP Outrigger for SR2K||Used at the beginning and end of rail runs - partial systems||500122|
|Finishing Rail||18" bull-nose D-shaped extension offsets base to prevent tripping hazards||SR2000-FR|
|Ladder Defender||Ladder kits come with two rails, 2 feet and locking pins||500472|
|GuardDog self-closing swing gate||Fits rail width of 30" - 36"||500368|
|Dimensions||36 × 24 × 13 in|
500019 – EZ Mover (ships UPS), 500023 – EZ Mover w/ Puncture Proof Tires (Ships LTL Freight)