Permanent Roof Anchor – Includes leak-proof flashing to protect roof – Fits up to 2×8 wooden frame – Easy Bolt/Clamp Installation – Stainless steel D-ring – 3M DBI-SALA 2103670
Attention: Ships out same or next business day.
- Easy installation – Everything you need for installation is included, place the U-bolt over the truss and tighten; all done.
- Permanent roof anchor – Permanent installation to residential or commercial wooden frames, provides secure tie-off point.
- Secure Tie-off – Allows roof top workers to tie-off and protect themselves against falls and accidents.
- Waterproof – Includes leak-proof flashing to prevent water damage to roof
- Corrosion resistant – 100% stainless steel D-ring with cap to prevent corrosion and aesthetically pleasing
- Versatile – Fits up to 2×8 wooden structures, such as: open trusses, joists and raftrers
Submit a request for bulk discount rates. Use this for large quantity orders that exceed the page quantity price breaks. Quotes are typically processed within 1 business day.Free Bulk Quote
You may also like…
DBI-SALA Construction Roof Anchor – Installs to rebar ring during pre-cast concrete work – Easy installation – Ratcheting securement system – No special tools required – Can be used with HLL system – 2190074 3M DBI-SALA$966.00
DBI-SALA Standing Seam Roof Anchor – Installs to flat or sloped standing seam roofs – Easy installation – Optional SRL anchor point – Low profile design – Non-penetrating clamp attachment – 2190073 3M DBI-SALA$495.43
DBI-SALA Swiveling Roof Anchor – Installs to sloped/flat wood and metal decking roofs – Easy installation – Secondary d-ring attachment point – Low profile – Ideal for use with HLL system – 2190071 3M DBI-SALA$310.29
Reusable Roof Anchor For Standing Seam Roofs – For flat or sloped standing seam roofs – Non-penetrating design – Portable – Reusable clamps – 3M PROTECTA 2190072$287.14
Knock-Down Disposable Roof Anchor (12 Pack) – For sloped or flat wooden roofs – Fast and easy nail installation – Stamped design is bent to fit roof – 3M PROTECTA 2103680
Freestanding Roof Top Anchor – Non-penetrating design – Built-in shock absorber – Sixteen 45 lbs. counterweights – Portable and reusable – 3M DBI-SALA 2100185
U Maxi Clamp kit (4 pack) – Single standing seam roof mounting clamps – For use with 2100138 roof anchor – Anti-corrosion finish – 3M DBI-SALA 7241208$223.71($55.93 / per unit)
E Maxi Clamp kit (4 pack) – Double standing seam roofs mounting clamps – For use with 2100138 roof anchor – Anti-corrosion finish – 3M DBI-SALA 7241206$265.00($66.25 / per unit)
Z Maxi Clamp kit – Standing Seam Roof Mounting Clamps (4 pack) – For standing seam roof anchor – Fits bulb type standing seams – Sold in packs of 4 – 3M DBI-SALA 7241204$290.57($72.64 / per unit)
Bitumin Membrane Roof Anchor – Single-ply bitumin membrane and built-up type roofs – Weather proof shrouding – 360-degree rotating D-ring – Compatible w/ Horizontal Lifeline – 3M DBI-SALA 2100142$449.14
Permanent Rooftop Anchor
3M DBI-SALA 2103670 – A rooftop anchor with corrosion resistant stainless steel D-ring, a leak-proof flashing to prevent damage to the roof and even a little cap to protect the anchor. The anchor installs up to 2×8 wooden structures.
Once installed, the stainless steel D-ring allows a worker tie-off point on the rooftop and work safely.
Please note: this is a permanent installation, see installation instructions.
Wooden Rooftop Anchors
Getting up on a residential rooftop to make repairs or renovations may seem simple – but we all know someone who has fallen. Don’t underestimate the fall just because its not a skyscraper or bridge – falls from any height can cause serious injury.
By investing in a roof anchor, lanyard and harness – you are creating a safe environment for your people to work. When a worker feels safe, they work with confidence – improving morale and productivity. Beyond all the safety and production bonuses – if someone takes one wrong step – worse case scenario; they find themselves safely swinging in mid-air.
See all wooden rooftop anchors
Often overlooked but critical to any personal fall arrest system - the anchor is what provides support to your system in case of a fall. Anchor are categorized based on the structure being attached to - ranging from: wooden rooftops, concrete columns or steel I-beams.
Your anchor can be a permanent installation meant for reoccurring jobs like maintenance and inspection work - or reusable and ideal for crews moving job to job. All anchors must provide a secure point of attachment to a personal fall arrest system and be capable of supporting 5,000 lbs. / or meet the OSHA 2:1 safety factor.
|Dimensions||3 × 0.4 × 13.9 in|
|Anchor Installation Type|
Construction, General Industrial, Mining, Oil & Gas