SR2000 LP Outrigger – Used to support rail runs on partial systems – Used to bypass obstructions and connect bases – BlueWater 500122 – Includes one base and connecting bar

$515.00$624.00

Clear
  • LP Outrigger – Outrigger is required at the beginning and end of rail run on partial systems (single spans).
  • For partial SR2000 systems – An outrigger is required for partial systems (single spans).  The outrigger can be any size rail kit or the Low Profile Outrigger if space is limited.
  • Non penetrating design – Counterweight base keeps rail stable and able to withstand 200 lbs of horizontal force.
  • Worried about damage? – To minimize any scuffs or damage done to rooftops, consider the EPDM and BUR pads for added protection.
  • Corrosion resistant – High strength mild steel with anti-corrosion powder coating for long term usage.
  • OSHA certified – Passes third party testing on vertical and horizontal stress tests.
SKU: bw-500122 Category:
500122 - Powder Coat Yellow
in stock
500129 - Hot Dipped Galvanized
in stock
Bulk Add to Cart

Bulk Quote

Submit a request for bulk discount rates. Use this for large quantity orders that exceed the page quantity price breaks. Quotes are typically processed within 1 business day.

Free Bulk Quote

Product Videos

Frequently bought together

Total Price: $995.00

Add to cart


You may also like…

Description

Use at the beginning and end of a rail run

The LP Outrigger is specifically designed for use on partial guardrail systems where a complete perimeter is not necessary or required. Ideal for railing off a section of roof edge or when maneuvering around large obstacles.  Use only when space is an issue and a standard rail section will not fit. 

Sounds complicated? Its not – just setup an extra base at the beginning and end of each run.  Any size rail kit can work as an outrigger.  Use the Low Profile Outrigger when space is limited.

Outriggers may be required

Partial railing systems require an LP outrigger to be used on the beginning and end of each run (straight line) of railing – regardless of whether it is only one rail or 100. LP outriggers are ideal when a complete railing system is not necessary such as railing off a single 140 ft. roof edge. The Low Profile outrigger should only be used where a standard rail section will not suffice due to limited space.  The Low Profile outrigger should not be used if it may cause a tripping hazard. 

 

Safety Rail 2000 - Fall protection system

The safety rail 2000 is an easy to use, portable guardrail system designed to be setup and broken down per job site. The unique design eliminates both the cost and danger over intermediate counterweight commonly used in other (lesser) guardrail systems. SR2000 is simply a set of rails and bases, setup around an elevated work area to prevent injury.

Each kit includes: 1 rail section, 1 base and locking pins.

 

Installation is as easy as: 1-2-3.

Best part of the Safety Rail 2000 is the ease in which the system can be setup and broken down per job requirements.
  1. Position the bases around the workarea
  2. Insert rails into base ports
  3. Insert the securing pins and lock base into place

Three workers can setup a 600ft of safety rail in under an hour.

 

Sold in many rail widths

Unique rooftops and elevated platforms require the use of many different combinations of rail widths. Rails sections are constructed of 1-5/8" steel tubing. Each base includes 4 ports, allowing the rail to be placed in an infinite number of positions. Each base can support up to 4 rails, gate assemblies and optional toe-board brackets available.

All rails meet the OSHA 42" height requirement for top and 21.5" for mid rails.

 

SR 2000 safety rail base

SR2000 railing requires a base

The safety rail 2000 system requires that each railing be counter-weighted by a base to prevent potential falls from elevated platforms. The non-penetrating design uses a 108 lb. cast-iron base to support the railing and any person who may fall into it. This unique design minimizes tripping hazards by eliminating the need of a intermediate counterweight. All bases feature four ports, allowing the rail to be positioned in any number of ways. Each base can support up to 4 rails.

 

 

Build your own Rooftop Guardrail system

The beautiful thing about the Safety Rail 2000 is the versitility and modular design of the railing and base.

ImageTitleDescriptionSKU
Safety Rail 2000Each kit includes a rail section, base and locking pins.SR2K
SR2000 Counterweight Base108 lb. cast-iron base capable of support 4 gates300014
EZ MoverMakes it easier to move the heavy counterweight bases.500023 500019
LP Outrigger for SR2KUsed at the beginning and end of rail runs - partial systems500122
Finishing Rail18" bull-nose D-shaped extension offsets base to prevent tripping hazardsSR2000-FR
The Ladder Defender is a OSHA compliant and cost-effective controlled access and passive fall safety solution for permanent rooftop access ladders. It features a unique non-penetrating design, the Ladder Defender ensures safe egress / ingress to and from the rooftop. Proprietary connector brackets attach to three different styles of the ladder frame.Ladder DefenderLadder kits come with two rails, 2 feet and locking pins500472
GuardDog self-closing swing gateFits rail width of 30" - 36"500368

Additional information

Mpn500122, 500129
Weight110 lbs
Dimensions19 × 20 × 5 in
Brand

Anchor Installation Type

Portable

Finish

,

Rail section width

3ft., 3.5ft., 4ft., 5ft., 6ft., 7.5ft., 10ft.

Reviews

There are no reviews yet.

Be the first to review “SR2000 LP Outrigger – Used to support rail runs on partial systems – Used to bypass obstructions and connect bases – BlueWater 500122 – Includes one base and connecting bar”

Your email address will not be published. Required fields are marked *