Flexiguard Supported Ladder System – Non-slip work platform with 12 ft. fall arrest rail & two trolleys – Includes stabilizing jacks, outriggers & wheels – Spring load swing gates – 3M DBI-SALA 8530397
Attention: Product has a 5 day leadtime and is expected to ship in 5 business days.
Submit a request for bulk discount rates. Use this for large quantity orders that exceed the page quantity price breaks. Quotes are typically processed within 1 business day.Free Bulk Quote
You may also like…
Supported Ladder System with 9 ft. (2.7m) platform height, 9 ft. (2.7m) platform length, 3 ft. (0.9m) platform width and 12 ft. (3.7m) rail length.
Flexiguard supported ladder system
A portable work platform with ladder and self-closing swing gate. The platform is equipped with a 12 ft. fall arrest rail and trolley system for overhead tie-off while on the platform. The flexiguard supported ladder system supports a maximum of two workers and is supported by a set of stabilizing level jacks and extendable outriggers.
Self-closing swing gate
The self-closing spring loaded steel swing gate ensures the door stays closed 24/7 – eliminating the chance of someone leaving the gate opening and accidentally falling out. The swing gate atop the ladder ensures a safer transition onto the ladder platform.
Non-slip work platform
The portable ladder access system features a non-slip coating on the floor of the elevated 9′ x 9′ x 3′ work platform. Special coating ensures a non-slippy surfaces to minimize any chances of falls or accidental injury.
Stabilizing jack with outriggers
The portable ladder system makes it easy for 1-2 users to reach an elevated platform like atop a garbage truck. The system can be easily wheeled up to the work area (lets say truck). Next release stabilizing jack and extend outriggers to securely plant the system to the ground before use.
14 ft. sliding anchor point
The flexiguard elevated work area includes a 14 ft. fall arrest rail with trolley for tie-off.
Please note: while the system can support two workers, only one worker can tie-off to the trolley.
The versatility of the EMU system makes it the most cost-effective access system on the market. Choose your base, move into position and vertically adjust with hand-crank wheel per job site.
Framed access systems are designed to provide fall arrest on large elevated platforms without the needed for large counterweights. Easy to move with two bar or service vehicle.
Ladder access systems make it easy for 1-2 works to reach an elevated platform with little effort. Ladder systems include stabilizing jacks and gliding anchors points.
The sky anchor is a simple, portable overhead anchor suitable for temporary or permanent installation. The mast can rotate of a full 360-degrees and adjusted with folding handles at base.
The SafRig is a counterweight jib system, suitable for use with counterweight or outrigger bases. Ideal for areas of work with limited space, the small frame is easy to pick up and move.
|Dimensions||200 × 200 × 200 in|
310 lbs. (141 kg)
|Anchor Installation Type|
|Max Number of Users|
2 Workers Max
|Platform height||9 ft. (2.7m)|
|Platform Length||9 ft. (2.7m)|
|Platform width||3 ft. (0.9m) platform width|
|Fall arrest rail width||12 ft. (3.7m)|
|Work platform||Non-slip coating|
|Support||Stabilizing jacks and outriggers|
|Swing gates||Spring-loaded self-closing|
|Bump plates||Foam padding|