Saflok Toggle Anchor – Install into 3/4 in. (19mm) precast concrete or steel hole – Use vertically in wall or overhead in ceiling – 360-degree steel D-ring – 3M DBI-SALA 2100101
$186.00 + Free Shipping
Attention: Ships out same or next business day.
- Easy installation – Drill 3/4″ hole, slip in the anchor and ‘toggle’ to wedge into place.
- Fits 3/4″ holes – Installs directly into 3/4″ (9mm) precast concrete or steel holes.
- Wall or Ceiling – Use vertically in a wall or in overhead ceiling application.
- 360-degree D-ring – Swiveling stainless steel d-ring allows connected user complete freedom of movement.
- Compact & lightweight – Easy to move, transport between job sites and store away when not in use.
- Corrosion resistant – High strength stainless steel components with anti-corrosion finish.
Submit a request for bulk discount rates. Use this for large quantity orders that exceed the page quantity price breaks. Quotes are typically processed within 1 business day.Free Bulk Quote
You may also like…
42in. Concrete Anchor Strap (25 Pack) – Web loop on each end – Slips over rebar – Abrasion resistant wear pad – Disposable design – 3M PROTECTA 2190063
42in. Concrete Anchor Strap (25 Pack) – D-ring at one end web loop on other – Slips over rebar – Abrasion resistant wear pad – Disposable design – 3M PROTECTA 2190057
Concrete Strut Anchor – Complete hands-free horizontal mobility – Accommodates 1-5/8 in. wide struts – Stainless Steel – Saflok steel carabiner – 3M PROTECTA AN220A$81.00
Concrete D-ring Anchorage Plate – Concrete bolt kit w/ 4 bolts included – Bolts to structure or fall arrest anchor point – Pre-drilled 14.3mm holes – 3M PROTECTA AJ720A$39.00
Strut Anchor – For 1-5/8 in. wide concrete and steel struts – One-hand installation – Overhead fall arrest anchor point – Stainless Steel – Saflok Carabiner – 3M DBI-SALA 2104709$119.14
Universal Roof Top Anchor – For metal, concrete & wooden roofs – For use on flat or sloped (<= 3:12 pitch) roofs - 360-degree rotating D-ring - Compatible with Horizontal Lifeline - 3M DBI-SALA 2100133
Drop-thru Anchor – For concrete or steel ceilings & decking – Installs into 1-1/2 in. to 1-3/4 in. diameter holes with 4 in. minimum thickness – 360-degree rotating D-ring – Shielded cable – 3M DBI-SALA$118.29 – $125.14
Concrete Parapet Anchor – Fits 1 in. to 14.5 in. wide concrete parapets – Non-damaging clamp-style anchor – Steel d-ring fall arrest anchor – 3M DBI-SALA 8523178$813.43
Concrete D-ring Anchor – Fits 11/16 in. or 3/4 in. concrete hole – Reusable D-ring assembly – Toggle-bolt Kit – Safe hook up feature – Swiveling D-ring – 3M DBI-SALA 2104560
Fits 3/4″ precast concrete or steel holes – in walls or ceilings
The 3M DBI-SALA 2100101 Saflok toggle anchor is one of the fastest and easiest ways to create anchorage points into precast concrete or steel. Simply drill a 3/4″ hole, slide the anchor in and squeeze to toggle the end unit into a horizontal position. This anchor can be installed either vertically in a wall or used overhead in a ceiling.
Once installed, the Saflok anchor provides a convenient 360-degree anchorage point for users to tie-off while working at height. Once the anchor is no longer needed, squeeze the anchor to switch the vertical position – allowing it to escape the hole with ease.
Often overlooked but critical to any personal fall arrest system - the anchor is what provides support to your system in case of a fall. Anchor are categorized based on the structure being attached to - ranging from: wooden rooftops, concrete columns or steel I-beams.
Your anchor can be a permanent installation meant for reoccurring jobs like maintenance and inspection work - or reusable and ideal for crews moving job to job. All anchors must provide a secure point of attachment to a personal fall arrest system and be capable of supporting 5,000 lbs. / or meet the OSHA 2:1 safety factor.
|Dimensions||12 × 4 × 0.75 in|
|Anchor Installation Type|
Construction, General Industrial, Mining, Oil & Gas, Utilities, Wind Energy