The Protecta Reusable Concrete Wedge Anchor provides a compact and reliable source of fall arrest or fall restraint anchorage for your worksite. Simple installation requires drilling a hole to a minimum depth of 3 1/2” or a maximum depth of 4”. Use a Rotary Hammer and industrial grade 3/4” Rotary Hammer Drill Bit.
Place your thumb in the anchor Swivel Ring and pull up on the Trigger with two fingers until fully retracted, then insert the anchor at least 3 in (7.62 cm) into the mounting hole and release the Trigger. Pull up on the anchor Swivel Ring to set the anchor. To release the Reusable Concrete Wedge Anchor, insert a punch or screwdriver into the hole until the tip rests on the striker plate, then tap the punch or screwdriver with a hammer. This anchor is reusable until subjected to fall arrest forces or an inspection is required.