8304000 - DBI Sala 7' Tripod Combo: Salalift Winch W/ 60' of 1/4" Galvanized Cable, Winch Bag W/ Sealed SRL W/ Retrieval (50' Galvanized 3/16" Cable) & Carrying Bag
(Similar Items Below)

• 7 ft. aluminum tripod is lightweight and portable, easily set-up by one worker and can be transported from one location to another just as easy (model 8000010 is 9 ft. tall)
• Adjustable locking legs adjust quickly in increments of 2-3/4" for added versatility and are kept in position with locking push pins - adjusts from 5 ft. to 7 ft. height and will span a 5 ft. diameter hole
• Complete with safety chain to prevent movement and safety shoes that incorporate a rubber sole for flat surfaces and spiked edges for slippery surfaces
• Heat treated cast aluminum head incorporates a built-in pulley system to rout lifeline of mechanical device directly over opening. Also equipped with drop forged steel eyebolts for use as anchorage point for secondary or back-up system, designed to allow the eyebolt to hand plumb regardless of surface configuration
• Complete with quick-mount bracket for attachment of DBI/SALA mechanical device for ease of use
• Additional (back-up) mechanical devices can be mounted to tripod with optional bracket/pulleys
• Rated working load is 350 lbs. for work support and 310 lbs. for fall arrest, can withstand up to 5,000 lbs. of vertical pull
• Durable corrosion resistant aluminum and heat treated cast aluminum construction
• Underwriters Laboratories tested and classified
• Meets or exceeds the strength requirements for anchorage's (5,000 lbs.), ANSI Z359.1, ANSI A10.14 and OSHA requirements
  Salalift® Winch:
• Salalift® winch is designed for raising, lowering, work support or personnel rescue
• Triple braking system including two independent centrifugal brakes and one dead-man type brake for added security
• Two-speed input (primary 6.6:2, secondary 3.3:1) for versatility and ease-of-use
• Durable corrosion resistant construction featuring a heat treated cast aluminum housing with steel gears contained in a sealed oil bath
• Overload clutch (load limiting input handle) reduces chance of injury to entangled worker
• Winch features 60' of galvanized ¼" steel cable, complete with carrying bag
• Complete with unique quick-mount bracket making attachment to DBI/SALA support structures (tripod, davit arm, etc.) simple and easy
• Underwriters Laboratories tested and classified
• Meets or exceeds all applicable industry standards including OSHA 1910.28 and 1926.451, OSHA 1910.146 and ANSI Z117.1
  

Sealed Self Retracting Lifeline:

• Sealed self retracting lifeline with stainless steel and cast aluminum housing for corrosion resistance
• 50 ft. 3/16" galvanized steel wire rope for durability (50, 85 and 130 ft. lengths in galvanized or stainless steel is available)
• Built in retrieval winch for raising/lowering load during emergencies with built-in shock absorbing capabilities (fall arrest capabilities in retrieval mode for added safety)
• Input crank handle incorporates brake which will prevent movement of the load if the operator accidentally released the handle during raising/lowering.
• Winch drive incorporates and overload device thus reducing the possibility of injury should the worker become entangled during retrieval
• Environmentally sealed design for safety, even in harsh environments
• Self adjusting disc brake for reliability
• Reserve lifeline retention system for added safety
• Self-locking swivel snap hook with impact indicator
• Swiveling anchorage loop to prevent twisting of lifeline
• Quick-mount bracket (model 3401065) enables user to attach to a DBI/SALA support structure with ease and carrying bag (model 9503515)
• Meets or exceeds all applicable industry standards including OSHA, ANSI and the stringent ANSI Z 359

For utmost confidence, DBI/SALA's packaged rescue systems are a perfect rescue/retrieval safety solution. You can go onto the job knowing that your equipment is ready to go; totally compatible and built with DBI/SALA quality.

Similar Models: